Daikin INVERTER FTXM-V Series Engineering Data page 213

FTXM-V Series
Installation Procedure (3)
Installation Procedure (3)
2) Connect the black harness to the leftmost terminal and the white harness to the second leftmost
terminal.
5. Cut the jumper.
1) Remove the electrical wiring box cover.
2) Cut the jumper (J9) of the PCB inside.
6. Install each component to the original position.
• Be careful not to confuse screw types. Refer to "Installation Procedure (1) ".
Black harness White harness
1 2 3
Electrical wiring box cover
Cut the jumper (J9)
211
Hook
(3 places)
2021/02/25
EDUS042101
3P647274-1
13:50:57