Locating the IP and MAC addresses
To find your IP and MAC addresses using
DigiConsole:
1. Run DigiConsole from the software CD
included with the product.
2. From the main menu, click Find to open the
list of devices. DigiConsole automatically
locates all available Internet cameras on the
network.
3. Locate the IP and MAC addresses next to the
device icon.
4. Record the MAC address. This information is necessary for the DDNS Registration process.
NOTE: The IP Devices must be on the same local network as the PC for discovery and initial setup. Once
the device is properly configured, you may access it remotely over the Internet.
Figure 30.2 IP and MAC address are immediately visible in the device list
Appendix C: Network Connectivity
Figure 30.1 IP and MAC addresses in DigiConsole
81