Fixed Ip Access - Lorex Vantage LNC116 Instruction Manual

L-View 116 Software
To configure startup options:
1. Check Automatically start L-View when Windows starts to have L-View open when
your computer is turned on.
2. Check Restore the last time playing/running state when L-View starts to set L-View
to restore the camera layout and connect to all the previously open cameras when
L-View opens.
3. Click OK to save changes.

3.9.3 FIXED IP ACCESS

The Fixed IP Access menu is for advanced users only. It must be used if you have
assigned your camera a fixed IP address on your router.
52
Check for L-View to open automatically
when your computer turns on
Check to restore camera layout and
connect to previously open cameras when
L-View opens.
Check to enable Fixed IP
addresses for cameras