Lnz4001 - Lorex LNE1001 Instruction Manual

LNZ4001

1
2
3
1. Antenna Connection (SMA): Connect the wireless antenna—angle at 90°, 180°; rotate 360°.
2. 12VDC: Connect the 12V DC power adapter.
3. Reset: Using a paper-clip, hold for 10 seconds to reset the camera to its default
configuration.
4. Audio In: 3.5 mm audio port for an external microphone (not included).
5. Audio Out: 3.5 mm audio port for external speakers or other audio devices (not included).
6. Ethernet: Network port. Connect one end of the included network cable to this port, and then
connect the other end of the network cable to a network router, switch, or active wall port.
7. Alarm Block: Connection block for external alarm/motion devices (not included).
6
5
4
7
Rear Panel
7