Appendix J: Registering, Removing, and Resetting Yoics Services
Troubleshooting Camera Registration
If you still cannot see your camera after registering for Yoics services, use the Unregister and
Enable check mark to retry renewing the connection to registration.
1. Open DigiViewer in your default browser using DigiConsole or through the camera's IP
address/DDNS domain name.
2. Log in to your camera using your user name and password (by default, admin/admin).
3. Click Settings and then click Remote Access.
4. Under Yoics Instant Networking, click Unregister.
5. Deselect Enable Yoics Remote Access and click Submit.
6. Refresh the browser page (press F5 on your keyboard).
7. Select Enable Yoics Remote Access and click Submit.
8. Refresh the browser page.
9. Repeat the registration process at the Yoics website.
99