C: Using Patrols - Lorex LNE1001 Instruction Manual

Controlling PTZ

C: Using Patrols

Use the saved tour data to set an automatic patrol for the PTZ network camera.
To set a patrol:
1. From the DigiViewer main menu, click Surveillance and then click .
Figure 7.10 Click Surveillance to return to live viewing and click "Play."
2. Click , and from the PTZ Control pane click Set (see figure 6.11). The Preset/Patrol pane
opens.
Figure 7.11 Open the PTZ Control pane and click Set.
3. Under Patrol, click Set, and then select the Tour number you saved in section B.
4. Click Patrol Go to start/stop the patrol tour.
Figure 7.12 Select a Tour and click Patrol Go.
23