Configuring Ddns In Digiviewer - Lorex LNE1001 Instruction Manual

Configuring DDNS in DigiViewer

Use the information from the DDNS confirmation email to configure DigiViewer to connect
remotely to your device using DDNS.
Figure 34.0 Remote Access menu in DigiViewer
To configure DDNS in DigiViewer:
1. Open DigiViewer:
• Open directly in your web browser using your
device's IP address
OR
• From DigiConsole. From the Find menu, right-click
the device and select Open Device in Browser
2. Enter the user name and password to login
to the device.
3. From the DigiViewer main window, click Settings and then
click Remote Access.
4. Under Dynamic DNS, select Enable Lorex Dynamic DNS
Service.
5. Enter the domain name and user name from your DDNS
confirmation email. DigiViewer will automatically update
with your newly entered DDNS information. Click
Surveillance to return to the main window to ensure the
changes have been implemented.
NOTE: If you have not already registered for free Lorex DDNS
Register with DDNS Service
Service, click
remote access window to go to the Lorex DDNS website.
Appendix E: Setting Up DDNS Service
Figure 34.1 Enter DDNS information confirmation email
Figure 34.2 Allow DigiViewer to update
at the bottom of the
before closing browser window
85