Using The Camera
Setting Up Local Viewing
With your camera now detected by DigiConsole, you can begin to view live images from your
camera on your local network. When using Internet Explorer, you need to install ActiveX in order
for DigiViewer to run properly; other supported browsers will require QuickTime.
To setup local viewing:
1. With DigiViewer open in your default browser, enter admin in the user name text field and
admin in the password text field. If using Internet Explorer, you will be prompted to Install
ActiveX Control.
2. Click the warning bar (it turns from yellow to blue) and select Install Active X Control.
3. Click Unblock or Continue in any subsequent security windows (this is only required for initial
setup).
4. Click Install to start the installation. DigiViewer resets and live video streams in your
browser.
Figure 6.1 Select ActiveX Install from the warning bar
Figure 6.2 Windows Security/Firewall
16
ATTENTION: For security reasons, you
should change the default username and
password (admin) for the camera. For
details on changing your user name and
password, see "Accounts" on page 65.
Figure 6.3 Install ActiveX