Remote Access; Yoics Instant Networking - Lorex LNE1001 Instruction Manual
Remote surveillance internet camera wired, wireless, pan/tilt, easy connect
Hide thumbs
Also See for LNE1001:
- Specifications (2 pages) ,
- Quick setup manual (2 pages) ,
- Instruction manual (143 pages)
Table of Contents
Advertisement
Remote Access
Use the Remote Access Menu to configure remote viewing settings for your device through Yoics,
MSN, or Lorex DDNS.
To open the Remote Access menu:
>
• Click Settings
Remote Access
Figure 21.0 Remote Access menu
Yoics Instant Networking
By default, your Internet camera is enabled with Yoics Easy-Connect Remote Viewing.
To configure Yoics Instant Networking:
1. Select Enable Yoics Remote Access & Sharing.
2. If you have not yet registered your camera, click Register this camera. For details on
registering your camera with Yoics, see
3. Click Submit Remote to save your settings. Please allow a few moments for your camera to
update.
NOTE: For more information on Yoics Easy Connect Remote Viewing, see "Using Yoics" on page 24.
NOTE: You can also remove Yoics remote access service from this menu. For details, see "Appendix J:
Registering, Removing, and Resetting Yoics Services" on page 94.
Settings
61
Advertisement
Table of Contents
