Adding Cameras To Digiviewer - Lorex LNE1001 Instruction Manual

Appendix B: Adding Cameras

Adding Cameras to DigiViewer

NOTE: Make sure additional cameras are setup and configured individually before entering their network
information in the Channel menu of the original camera.
Figure 29.3 Enter the IP and login information of the additional camera in
the Channels menu of the original camera
To add additional cameras to DigiViewer:
1. Double-click your original camera to launch DigiViewer in your default browser.
2. Log in to your original camera.
3. From DigiViewer, click Settings and then click Channels. You will add information about your
new camera to the list of Remote Cameras and Video servers.
4. Under Channel Name, enter a name for the channel.
5. Under Model, select LOREX (default).
6. Under URL or IP Address, enter the IP Address or DDNS domain name of the additional
camera combined with the new Web port. For example, 192.168.0.122:81
NOTE: If your additional camera will be on a different network than your original camera, you will need
to enter the DDNS domain of the additional camera in the URL field combined with a new Web port. You
will need to register the additional camera for Lorex's FREE DDNS service prior to entering any DDNS
information in the Channels menu.
7. Under RTSP Port, enter the streaming video port for the streaming video port for the
camera. For example, 553.
8. Under User Account, enter the user name for the camera (by default, admin).
9. Under password, enter the corresponding password to access the camera. Re-enter the
password to confirm (by default, admin).
10. Click Submit Channels to save your settings. Please allow a few moments for all the cameras
on the network to update.
78