Presets, Tours, And Patrols; A: Setting Presets - Lorex LNE1001 Instruction Manual

Controlling PTZ

Presets, Tours, and Patrols

Preset, Tour, and Patrol are advanced features of a PTZ Internet camera. You can use DigiViewer
to access and customized these advanced features.

A: Setting Presets

To set Presets:
1. Use the navigation arrows to position the camera at point where you want to patrol.
• Click to pan left and right.
• Click to tilt the camera up and
down.
2. From the PTZ Control pane, click SET
(see figure 6.4). The PTZ Control pane
displays Preset/Patrol controls.
3. Under Preset, click Set (see figure
6.5).
4. From the prompt, "Applied
Successfully," click OK.
5. Click Go Back to set a new position
and repeat steps 1~4. You can set up
to 32 positions; each Tour can have up
to 8 positions.
OPTIONAL
6. : Click Preset Go to view
the list of set presets (i.e. Preset1,
Preset2, etc.). Select a preset from
the list. The camera will reposition
itself to the selected preset.
Figure 7.7 Click Preset Go to open list of presets
20
354° Pan / 125° Tilt
Figure 7.4 Set a position for the camera and then click Set.
Figure 7.5 In the Preset/Patrol pane, click Set to save the preset.
Figure 7.6 Click OK and repeat steps 1~4.