Live Video Options; Open Device In Browser; Stop Live Video; Record Video Image - Lorex LNE1001 Instruction Manual

Live Video Options

NOTE: You must install DigiConsole to your PC in
order to view live video in DigiConsole.
With live video playing in DigiConsole, you can
access more options for the IP device.
To view more options, right-click the selected
device and choose any of the following:

• Open Device in Browser

• Stop Live Video

• Record Video Image

• Mute Audio From Camera

• Enable Microphone
• Full-screen mode
• Refresh the list of devices
Open device in browser
View live, streaming video from the device using
DigiViewer in your default web browser.
To open your device in a browser:
Right-click the device and select Open device in
browser. For details on using DigiViewer, see
"DigiViewer" on page 43.
Stop Live Video
Select this option to stop the live video stream in
DigiConsole.
Record Video Image
Select this option to record the live video stream to
your PC as an AVI file. For details,
Live Video" on page 41.
To record live video:
• Right-click the device and select Record
Video Image
To stop recording:
• Right-click the device and select Stop
Recording
NOTE: You can only record live video once you have
installed DigiConsole to your PC. Mac installation is
not supported. For more details, see "Installing
DigiConsole" on page 39.
Mute Audio From Camera
Select this option to mute the audio feed from the device.
see "Recording
Figure 11.4 Live video options
Figure 11.5 Record
Figure 11.6 Recording live video
Using DigiConsole
37