Adjusting Focus
You can manually adjust the focus of the camera.
NOTE: Make sure the camera is powered on and connected to a network
before attempting to adjust the focus.
NOTE: Please remove the clear vinyl cling over the lens before using the
camera.
To adjust the focus:
1. Open DigiViewer in your default browser.
NOTE: You can open DigiViewer from DigiConsole or directly in your browser using your camera's IP
address.
2. Using DigiViewer as a monitor, turn the ring at the lens of the camera back and forth until
image is in focus.
Figure 6.4 Manual focus ring (LNE3003 shown)
Using The Camera
17