Rear Panel; Lne1001; Lne3003 Series - Lorex LNE1001 Instruction Manual
Remote surveillance internet camera wired, wireless, pan/tilt, easy connect
Hide thumbs
Also See for LNE1001:
- Specifications (2 pages) ,
- Quick setup manual (2 pages) ,
- Instruction manual (143 pages)
Table of Contents
Advertisement
REAR PANEL
LNE1001
1
2
1. Speaker: 3.5 mm audio port for external speakers or other audio devices (not included).
2. Reset: Using a paper-clip, hold for 10 seconds to reset the camera to its default
configuration.
3. LAN: Network port. Connect one end of the included network cable to this port, and then
connect the other end of the network cable to a network router, switch, or active wall port.
4. DC 5V: Connect the 5V DC power adapter.
LNE3003 Series
1
2
1. DC 5V: Connect the 5V DC power adapter.
2. Reset: Using a paper-clip, hold for 10 seconds to reset the camera to its default
configuration.
3. Speaker: 3.5 mm audio port for external speakers or other audio devices (not included).
4. LAN: Network port. Connect one end of the included network cable to this port, and then
connect the other end of the network cable to a network router, switch, or active wall port.
5. Antenna Connection (SMA): Connect the wireless antenna—angle at 90°, 180°; rotate 360°.
6
3
4
4
3
5
Advertisement
Table of Contents
