Network Services; Outgoing Email Server - Lorex LNE1001 Instruction Manual

Network Services

The Network Services Menu controls the External Networking Information for the camera (used
for Remote Access).
To open the Network Services menu:
>
• Click Settings Network Services.
Figure 22.0 Network Services menu

Outgoing Email Server

If you have registered for Lorex's FREE service, you can use the Lorex Email Relay
(mysmtp.lorexddns.net) to send email notification for triggered events on your camera. If desired,
you can also use your own email server.
To configure email server options:
1. Select the box Enable outgoing email messages. This will send an email notification
whenever motion is detected by the camera(s) or an external sensor is triggered. If using
Lorex DDNS, go to step 4. If using your own email server, go to step 2.
NOTE: To configure motion sensing, see "Motion Events" on page 48.
2. Under SMTP Server, enter the SMTP server address for the outgoing email account.
3. Under Port, enter the outgoing email port.
NOTE: The port may have to be forwarded on your router.
4. Under From Address, enter the sender's email address for the outgoing email notification. If
using Lorex DDNS, go to step 7.
5. Under Account Name, enter the user name/ID required for the email server.
6. Under Account Password, enter the password for the email server. Re-enter the password to
confirm.
7. Click Submit Services to save your settings. Please allow a few moments for your camera to
update.
8. Click Send test email to verify you have entered the correct network information.
Settings
63