Preset - Lorex LNE1001 Instruction Manual

Preset

ATTENTION: This section is applicable to LNZ4001 camera models
Use the Preset menu to configure up to 32 presets on a PTZ Internet camera.
NOTE: You must have at least one saved preset on the camera in order to use the Preset menu. For
details on setting presets, see "Events" on page 48.
Figure 18.3 Preset menu
To view a preset position:
• From the drop-down menu, select one of your presets. Click Preset GO to position the camera
to this preset
To calibrate the camera:
• Click Calibration to reset the camera to the default position
NOTE: For more details on resetting and calibrating the camera, see APPENDIX
To rename a preset:
1. Select a preset from the drop-down menu and click Preset Go.
2. In the Preset Pos. Name field, enter a new name for the preset and click Set. The new preset
name is added sequentially to the Preset List, but the old preset is not deleted.
To delete a preset:
• Select one of the presets from the list and click Delete.
NOTE: The preset is immediately deleted. This step cannot be undone.
NOTE: The next preset added will replace the previously deleted preset. For example, you have 10 presets
on your PTZ camera and delete Preset2. When you add another preset, that new preset will be Preset2,
not Preset11.
only
.
Events
51