Download Print this page
Lorex LNE8964A SERIES Quick Start Manual
Lorex LNE8964A SERIES Quick Start Manual

Lorex LNE8964A SERIES Quick Start Manual

4k motorized varifocal hd ip dome security camera with audio

Advertisement

Quick Links

Package Contents
• 4K Motorized Varifocal HD IP Dome Security Camera
• Mounting Kit*
• Mounting Template*
• CAT5e Ethernet Extension Cable with Pre-attached
RJ45 Cable Gland*
• Allen Key*
* Per camera in multi-camera packs.
ATTENTION:
It is recommended to connect the camera to the NVR or an external PoE switch. If
using a DC power adapter (not included) with the camera, a REGULATED power supply
is REQUIRED for use with this camera. Use of a non-regulated, non-conforming power
supply can damage this product and voids the warranty.
Cable Extension Options
Extend the cable run for your camera. Additional extension cables sold
separately. See table below:
Max Cable Run
Cable Type
Distance
CAT5e (or higher) Ethernet cable
300ft (92m)
• You can use a RJ45 coupler or switch (not included) to connect male
ends of Ethernet cable together.
• To extend the cable run beyond 300ft (92m), a switch will be required
(sold separately).
Safety Precautions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels
noted in the camera's specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of
intense light.
• Use only the supplied regulated power supply provided with the
product. Use of a non-regulated, non-conforming power supply can
damage the product and void the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use
any harsh, chemical-based cleaners.
• The supplied cable is rated for surface mounting only. Cables for in-wall
and floor-to-floor installations are sold separately (CMR type). These
lorex.com
and other cables are available at
Using the RJ45 Cable Gland (Optional)
The RJ45 cable gland covers the camera's Ethernet connector and the RJ45 plug to
provide weather-resistance and protection from dust, dirt and other environmental
contaminants.
The RJ45 cable gland is pre-attached to the
included CAT5e ethernet extension cable.
RJ45 Cable Gland
To use the RJ45 cable gland:
Twist the RJ45 cable gland barrel securely onto the camera Ethernet connector.
RJ45 Cable
Camera Ethernet
Gland Barrel
Connector
NOTE: The RJ45 cable gland is weather-resistant. Seal the cap with silicone and/or
electrical tape for additional sealing if it will be exposed to precipitation regularly.
Audio Settings
Audio recording without consent is illegal in certain jurisdictions. Lorex
Corporation assumes no liability for use of its products that does not
conform with local laws.
Audio is disabled by default. To enable camera audio through a Lorex HD NVR:
1. In Live View, right-click anywhere on the screen to open the Quick Menu.
2. Click Main Menu. If prompted, enter the system user name and password.
and select Recording > Recording.
3. Click
4. Configure the following:
A. Under Channel, select the channel
that the audio-enabled camera is
connected to.
B. Under Type, select Continuous.
C. Check the check box to enable audio
for Main Stream.
D. You can also enable audio for Sub
Stream. Check the check box to enable
audio for Sub Stream.
E. Video must be enabled for Sub
Stream to enable/disable audio.
F. Click Apply to save your changes.
NOTE:
You must enable audio for all recording types under the Type dropdown.
Max # of
Repeat the above steps to enable camera audio for all recording types.
Extensions
5. Click OK.
3
NOTE:
These instructions are based on current Lorex HD NVR interface. For more
information, see your NVR's instruction manual on lorex.com.
Dimensions
Disclaimers
• For a full list of compatible recorders, visit
• Not intended for submersion in water. Installation in a sheltered
location recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the
camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
Installation Tips
CAT5e
Ethernet
• Point the camera where there is the least amount of obstructions
Extension
(i.e., tree branches).
Cable
• Install the camera where vandals cannot easily reach.
• Secure cabling so that it is not exposed or easily cut.
• This camera is rated for outdoor use. Installation in a sheltered
location is recommended.
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
ATTENTION:
A
B
C
D
E
F
4.8" / 122mm
4.1" /
105mm
4.8" /
122mm
lorex.com/compatibility
LNE8964_LNE8974_QSG_EN_R1
4K Motorized Varifocal HD IP Dome
Security Camera with Audio
Quick Start Guide
English Version 1.0
LNE8964A / LNE8974A SERIES
www.lorex.com

Advertisement

loading

Summary of Contents for Lorex LNE8964A SERIES

  • Page 1 • CAT5e Ethernet Extension Cable with Pre-attached Audio is disabled by default. To enable camera audio through a Lorex HD NVR: RJ45 Cable Gland* 1. In Live View, right-click anywhere on the screen to open the Quick Menu.
  • Page 2: Need Help

    C. Attach the dome cover onto the camera base. Ensure that the for “How do I make my camera switch to night mode?” dome cover lays flat against the camera base. No audio • Audio is only supported on Lorex HD NVRs. For a list of Router HD NVR Camera compatible recorders, visit lorex.com/compatibility.

This manual is also suitable for:

Lne8974a series