Table of Contents
Advertisement
■ Names and Functions of Parts
Top
④
Mounting Bracket
Use the screw holes provided when fixing the
camera onto a mounting bracket. Use the clamp
screw as shown in the picture.
The mounting bracket can be attached to either
the bottom or the top of the camera.
Be careful not to tighten the screws more than
5mm into the body, otherwise serious damage
can occur.
Super DNR High Resolution Color Camera
L
10
Names and Functions of Parts ■
Rear
⑤
⑥ ⑦
IRIS JACK OSD EXTRA
POWER
⑨
DC
⑪
VIDEO
AC24V IN
DC12V IN
Auto iris lens connector
Connection terminal for an auto iris lens.
Auto iris lens selection switch
Used to change between DC or Video depending upon the type of auto
iris in use.
OSD Extra
Connect to remote controller (optional - model # ACCRC01) to do camera
set up from the ground instead of on the ladder. Also includes BNC spot
video out to connect to a service monitor.
Video output terminal
Sends video signals and connects to the video input terminal of the monitor.
Power lamp
Lights up when the correct power is supplied to the camera.
Setting button
SET button : Used for the menu display. This button can be used to
confirm settings after changing the value of the selected function or
current conditions.
UP & DOWN buttons : Used for selecting items by moving the cursor
up or down on the menu screen.
LEFT & RIGHT buttons : Used when changing item values, by moving
the cursor to the left or right on the menu screen.
Power input terminalLow voltage power connection.
11
⑧
VIDEO OUT
⑩
SET
Super DNR High Resolution Color Camera
Advertisement
Table of Contents
