Note: If power to the modem is interrupted you must complete
Disabling Receive-only Fax
To disable the Receive-only Fax function and restore the printer
serial port to normal use, complete the following steps:
1
2
3
4
5
the following steps, in order, for your printer to receive faxes:
1
Turn the printer power Off (O).
2
Turn the modem power On.
3
Turn the printer power On (|).
From the printer operator panel, select FAX MENU,
Fax Port, Disable. Wait for the printer to reset.
Turn the modem power Off.
Turn the printer power Off (O).
Disconnect the modem cable from the printer serial port.
Turn the printer power On (|).
Using Your Printer
Receive-only Fax
173