Display Problems; Printing Problems - Lexmark Optra S1625 User Manual

Caring for Your Printer

Display Problems

Printing Problems

200
Solving Printer Problems
Problem Action
Menus Disabled The operator panel menus have been disabled. To
status message enable the menus if they are not password protected:
appears on the
Turn the printer off.
display.
Press and hold Go and Stop, and then turn the printer
On (|).
Release the buttons when Performing Self Test is
displayed.
If the operator panel menus have been password
protected, see your system administrator.
Display shows only Turn the printer power Off (O).
diamonds or is
Wait about 10 seconds.
blank.
Turn the printer power On (|). The printer should issue
the Performing Self Test message. When the test is
completed, the Ready message displays.
If the messages do not display, turn the printer power
Off (O) and call Lexmark Technical Support.
Menu settings The settings are being overridden by settings in the
changed from the software application, the printer driver, or the printer
operator panel utilities.
have no effect.
Problem Action
Job prints from a Check PAPER TYPE in the PAPER MENU on the
different tray or on printer operator panel and in the printer driver. See
the wrong paper. PAPER TYPE on page 65.
Printer does not • Verify that Duplex is selected on the printer operator
duplex pages. panel and in the printer driver.
• Make sure adequate memory is available.
Paper does not Turn the paper stack over in the tray or multipurpose
stack neatly in any feeder.
output bin.