Multipurpose Feeder - Lexmark Optra S1625 User Manual

Multipurpose
Feeder
The multipurpose feeder, located on the front of the printer, is
standard on the Optra S 1855, Optra S 1625, and Optra S 1255. It
can be closed when you are not using it, making the printer more
compact.
The multipurpose feeder can hold several sizes and types of paper,
such as transparencies, post cards, note cards, and envelopes. You
may also want to use the multipurpose feeder for single page print
jobs on letterhead, colored paper for use as separator sheets, or
other special paper you do not keep in a paper tray.
You can load approximately 100 sheets of 75 g/m
specific size at a time. You can load approximately 12 envelopes at
a time. You can load approximately 75 transparencies at a time.
The maximum stack height for the loading of any print material is
10 mm (0.4 in.). Print material is loaded face up in the
multipurpose feeder except when you load letterhead paper for
duplex printing. The multipurpose feeder accepts print material
within the following dimensions:
Width
Length
Before loading print materials in the multipurpose feeder, make
sure you select the paper size and paper type from the printer
operator panel for the MP Feeder. When you print from the
multipurpose feeder, also select the paper size and paper type
from your software application for the print material you have
loaded.
Minimum
69.85 mm (2.75 in.)
127 mm (5 in.)
Using Your Printer
Chapter
2
(20 lb) paper of a
Maximum
229 mm (9.01 in.)
355.6 mm (14 in.)

Multipurpose Feeder

5
157