Using Your Printer
Receive-only Fax Setup
172
Receive-only Fax
1
Turn the printer power Off (O).
2
Turn the modem power Off.
3
Physically connect the hardware. Consult the class 1 fax
modem documentation for details.
Note: Instead of connecting the class 1 fax modem to a
computer, you connect it to the serial port of your
printer. The end of the modem cable that connects to
the serial port must be 25-pin.
Power Cord
External
class 1
fax
modem
4
Turn the modem power On. It is very important that you
power on the modem before you power on the printer.
5
Turn the printer power On (|).
6
From the operator panel, select FAX MENU, Fax Port.
Select the serial port connected to the modem. For more
information on FAX MENU settings, see "Fax Menu" on
page 119.
The printer is now ready to receive faxes.
To Printer Serial Port
Modem Cable
Phone Cord