Using The Multipurpose Feeder - Lexmark Optra S1625 User Manual

Using the Multipurpose Feeder

After loading print material in the multipurpose feeder, select the
paper source from your software application, and then select the
paper size and type from both your software application and from
the printer operator panel.
To set the printer operator panel:
1
2
3
Note: Software settings may override operator panel settings.
Make sure the PAPER SIZE for the multipurpose feeder
(MP Feeder Size) is set to the correct size paper,
envelope, or other print material you are loading.
Make sure the PAPER TYPE for the multipurpose feeder
(MP Feeder Type) is set to the correct value for the print
material you are loading.
Press Go to return the printer to the Ready status
message.
Using Your Printer
Multipurpose Feeder
169