Line 2 Messages - Lexmark Optra S1625 User Manual

Caring for Your Printer

Line 2 Messages

Status Message
Check Config ID
Infrared x
LocalTalk x
Fax
Fax x
Maintenance
Network x
Parallel
Parallel x
Serial
Serial x
182
Understanding Printer Messages
The following are messages that appear on the second line of the
display. Line 2 messages give information about printer status.
Meaning
The printer configuration identification (ID) is not set or is
not valid. Call Lexmark Technical Support.
x is 1, 2, or 3 and represents the infrared port attached to
connector x. The printer is locked onto the Infrared x host
interface.
x is 1, 2, or 3 and represents the LocalTalk card attached to
connector x. The printer is locked onto the LocalTalk x
host interface.
The printer is processing a fax via the standard serial port.
x is 1, 2, or 3 and represents the fax modem attached to
connector x. The printer is locked onto the Fax x host
interface.
The printer requires replacement of routine maintenance
items to maintain top performance, and avoid print
quality and paper feed problems. The message displays
when the printer maintenance counter determines 250,000
pages have printed. These components are in a
maintenance kit available from Lexmark.
This message continues to display until the maintenance
kit items are installed and your service provider resets the
printer. For more information, see "Maintaining Your
Printer" on page 247.
x is 1, 2, or 3 and represents the network card attached to
connector x. The printer is locked onto the Network x host
interface.
The printer is locked onto the printer standard parallel
host interface.
x is 1, 2, or 3 and represents the parallel port attached to
connector x. The printer is locked onto the optional
parallel x host interface.
The printer is locked onto the printer standard serial host
interface.
x is 1, 2, or 3 and represents the serial port attached to
connector x. The printer is locked onto the optional serial
x host interface.