Changing Output Bin Settings; Output Bin Linking - Lexmark Optra S1625 User Manual

Changing Output Bin Settings

You can select output bin functions from the operator panel or
from your software application, if it supports output bin selection.
If the software setting differs from the operator panel setting, the
software setting overrides the panel setting.
For example, if you select Bin 2 from the operator panel, but the
software specifies the printer standard bin, the printer prints to the
printer standard bin. If you select Bin 2 from the operator panel,
but the software specifies output bin 3, the printer prints to output
bin 3.
The factory default is the printer standard bin, which is shown on
the operator panel as Standard Bin. When one output option is
installed, the PAPER MENU includes an additional value for the
Output Bin setting, which is Bin 1. For example, if all optional
output expanders are installed for the Optra S 2455, the operator
panel displays all values for the Output Bin setting in the PAPER
MENU: Standard Bin, Bin 1, Bin 2, and Bin 3.

Output Bin Linking

Output bin linking is set from the PAPER MENU with the
Configure Bins menu item. The values for this item are Mailbox,
the factory default, Link and Link Optional.
The Configure Bins menu item is only displayed if one or more
output options are installed.
The Mailbox setting allows the Standard Bin and any output
options to be selected individually. Print material is placed in the
output bin selected by the print job. If a print job does not specify
the output bin, the printed material goes to the default output bin.
See Output Bin on page 66 for more information. When an output
bin is full, the Remove Paper message is displayed and the printer
stops printing until the printed material is removed from the
output bin.
Installing Options
Output Expanders
291