Lexmark Optra S1625 User Manual page 209

Attendance
Message
Change <tray>
<Custom Type Name>
<size>
<type><size>
Meaning and Required Action
The printer is requesting different print material than what has been
loaded in the tray or set in the Paper Size or Paper Type menus. The
display shows the following information:
On line 1 of the display, the tray name (<tray>) where it expects to
find the print material is shown.
On line 2 of the display, one of the following is shown:
<Custom Type Name>: A user-defined name, created using the
MarkVision utility, for custom type 1 through 6. The name is
truncated to 16 characters.
<size>: If the requested type matches the type currently in the tray
and the custom type name has not been defined by you, only the
paper or envelope size displays. The name is truncated to 16
characters.
<type><size>: The requested type <type> is a type other than a
custom type. The type name is truncated to 9 characters. The
requested size <size> of paper or envelope is displayed. The size
name is truncated to 6 characters.
• Load the requested size and type in the source. The printer
automatically clears the message and continues processing the job.
• To ignore the request, and print on the size and type installed in
the tray, press Select.
• To cancel the current job, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Cancel Job is on the
second line. Press Select.
• To reset the printer, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Reset Printer is on the
second line. Press Select.
Caring for Your Printer
Understanding Printer Messages
193