Lexmark Optra S1625 User Manual page 99

Job Menu Selections (Continued)
Menu Item Values and Functions of the Menu Items
Reset Active Bin The Reset Active Bin menu item is displayed if the following conditions
exist:
• The Configure Bins menu item in the Paper Menu is set to either
• The printer displays the Busy or Waiting status message.
• Menu> is pressed to display the Job Menu.
When bins are linked together the printer puts paper into them in a certain
sequence until all the bins are full. If paper is removed from the linked bins
between print jobs, the printer sends subsequent jobs to the bin that last
received paper (active bin). Reset Active Bin instructs the printer to send
subsequent print jobs to the first bin in the sequence of linked bins instead
of resuming with the bin that was current when paper was removed. This is
useful, for instance, if you want to send a large print job to a set of linked
bins and want to make sure it holds the entire job.
Note: The Reset Active Bin operation has no effect if the selected bins are
either full or nearly full.
Depending on the value selected in the Configure Bins menu item, the
Reset Active Bin menu item will perform one of the following operations:
Configure Bins set to Mailbox:
The value list consists of names assigned to groups of linked bins. To reset
the active bin, press Menu> until the grouped bin name you want is
displayed. Press Select to reset the active bin for that group.
Configure Bins set to Link:
No value list is displayed. When the Reset Active Bin menu item is
displayed, press Select to reset the active bin.
Configure Bins set to Link optional:
No value list is displayed. When the Reset Active Bin menu item is
displayed, press Select to reset the active bin. The Reset Active Bin
operation has no effect on the Standard bin.
* Factory default
Mailbox, Link or Link Optional mode. See page 67 or page 291 for more
information on configuring bins.
Note: If set to Mailbox, two or more bins must be grouped by assigning
them the same bin name.
Using Your Printer
Using the Operator Panel and Menus
83