Lexmark S600 Series Installation Instructions Manual
Hide thumbs
Also See for S600 Series:
- User manual (156 pages) ,
- Quick reference manual (25 pages) ,
- Network manual (19 pages)
Advertisement
Quick Links
1
Unpack printer
2
Remove tape and packing material from all areas of the
printer
Lexmark S600 Series Installation
Notes:
Place the printer near the computer
•
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.
Do not attach the USB cable until
•
prompted to do so.
The packaged printhead is shipped
•
inside the printer.
Contents may vary by model and
•
region.
Advertisement
Related Manuals for Lexmark S600 Series
Summary of Contents for Lexmark S600 Series
- Page 1 Lexmark S600 Series Installation Unpack printer Notes: Place the printer near the computer • during setup. If you're setting up on a wireless network, then you may move the printer after setup is complete. Do not attach the USB cable until •...
- Page 2 Lexmark S600 Series Installation Raise paper support Raise printer control panel Open printer and remove packaged printhead...
- Page 3 Lexmark S600 Series Installation Close printer Use lever to extend paper guides Load paper Notes: Use the lever to adjust the paper • guides. Do not load more than 100 sheets in • the paper tray.
- Page 4 Lexmark S600 Series Installation Extend paper exit tray Connect power cord only Note: DO NOT attach the USB cable yet. CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting power or making any cabling connections. Make sure printer is on...
- Page 5 Lexmark S600 Series Installation Follow prompts on the printer control panel Follow the prompts on the printer control panel. After following the prompts, click Continue below. Install printhead and ink cartridges If you need to install the printhead and cartridges, click Continue.
- Page 6 Lexmark S600 Series Installation Squeeze and lift latch Remove printhead from disposable container Insert printhead and close latch until it clicks...
-
Page 7: Close Printer
Lexmark S600 Series Installation Close printer Open printer Note: The printhead moves to the cartridge installation position as shown. - Page 8 Lexmark S600 Series Installation First, insert each color ink cartridge. Then, use two hands to install black cartridge. Close printer...
- Page 9 Lexmark S600 Series Installation Touch OK to print alignment page Notes: Do not remove the page until • printing stops. The alignment page may take a while to print and will move in and out during the process. Streaks on the alignment page are •...