Removing An Option Card - Lexmark Optra S1625 User Manual

Removing an Option Card

W
ARNING
1
2
3
4
5
6
Electronic components are easily damaged by
:
static electricity. Touch something metal
before you touch the card.
If necessary, follow the steps under "Accessing the
Printer System Board" starting on page 293.
Locate the option you want to remove. See page 296.
Loosen and remove the two screws over and under the
slot. Gently pull the card out of the connector on the
system board.
Place the option card in its original packaging. If you did
not save the packaging, wrap the card in paper and store it
in a box.
If you need to install a replacement card or another
option on the system board:
-
See "Option Cards" on page 308.
-
See "Printer Memory Option" on page 299.
-
See "Flash Memory Option" on page 304.
See "Closing the Printer System Board" on page 297 to
reattach the shield and side door.
Installing Options
Memory and Option Cards
319