Lexmark Optra S1625 User Manual page 105

Setup Menu Selections (Continued)
Menu Item Values and Functions of the Menu Items
Print Timeout Disabled
1 to 255 (90*)
The Print Timeout setting determines the time (from 1 to 255 seconds) the
printer waits before printing the last page of a print job that does not end
with a command to print the page.
When a print timeout occurs, the printer prints the page in the print buffer.
Turn Print Timeout off by selecting Disabled. When Print Timeout is
disabled, the printer does not print the last page of a print job until one of
the following occurs:
• The printer receives enough information to fill the page.
• The printer receives a Form Feed command.
• You select Print Buffer from the JOB MENU. See page 82 for more
The print timeout counter does not start until the printer issues the Waiting
message on the operator panel.
Wait Timeout Disabled
15 ... 65535 (40*)
The Wait Timeout setting determines the amount of time in seconds the
printer waits to receive additional bytes of data from the computer. When
this timeout expires, the print job is canceled.
Wait Timeout is only available when using PostScript Level 2 emulation.
The setting has no effect on PCL emulation print jobs. You can set Wait
Timeout off by selecting Disabled.
* Factory Default
information.
Using Your Printer
Using the Operator Panel and Menus
89