Duplexing (Two-Sided Printing) - Lexmark Optra S1625 User Manual

Using Your Printer

Duplexing (Two-Sided Printing)

152
Using Print Materials
8
Slide the paper tray in until it snaps into place.
When you install the duplex option, you can print on both sides of
most high-quality xerographic copier papers, office papers, and
selected bond papers. For best results, use only non-recycled
xerographic paper.
Note: Papers suitable for duplexing may be loaded into all
standard or optional trays, and the multipurpose feeder.
Duplexing can place heavy demands on printer memory.
However, the standard memory installed in your printer is
sufficient for most duplexed jobs printed at 600 dpi. Duplexing
very complex jobs, particularly when the print resolution is set to
1200, may require optional memory.
When duplexing, side two is always printed first to ensure your
pages are properly collated in the standard output bin.
When you're duplexing preprinted forms—such as letterhead
paper—from one of the paper trays, place the paper in the tray
face up. See page 150. (Since letterhead must be placed face down
for single-sided printing, you may want to reserve one tray for
letterhead that you want to duplex.)
See "Installing the Duplex Option" on page 273 for more
information.