Notices - Lexmark Optra S1625 User Manual

Notices

Electronic Emission Notices
With a Network Card Installed
Federal Communications Commission (FCC) Compliance Information
Statement
The Optra S laser printer, Type 4059, has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Oper-
ation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The FCC Class A limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
The manufacturer is not responsible for any radio or television interference
caused by using other than recommended cables or by unauthorized changes or
modifications to this equipment. Unauthorized changes or modifications could
void the user's authority to operate this equipment.
Note:
Industry Canada Compliance Statement
This Class A digital apparatus meets all requirements of the Canadian Interfer-
ence-Causing Equipment Regulations.
To assure compliance with FCC regulations on electromagnetic interfer-
ence for a Class A computing device, use a properly shielded and
grounded cable such as Lexmark part number 1329605. Use of a substi-
tute cable not properly shielded and grounded may result in a violation
of FCC regulations.
Reference
353
Notices