Lexmark Optra S1625 User Manual page 210

Caring for Your Printer
Attendance
Message
Reattach Envelope
Feeder
Check Duplex
Connection
Reattach
Output Bin x
Check Tray x
Connection
Check Output
Bin Connection
Close Door or
Insert Cartridge
Close Duplex
Rear Door
194
Understanding Printer Messages
Meaning and Required Action
The printer has lost communication with one of the following:
• Optional envelope feeder
• Duplex option
• Optional output expander (x represents 1 through 3 depending on
the number of optional output expanders installed)
• Standard or optional trays (x represents trays 2 through 5
depending on how many trays are installed)
Communication may be lost in the following ways:
• The device was removed from the printer, for example, some
options are removed to clear paper jams.
• The device may still be attached to the printer, but may not be fully
connected or may be experiencing a hardware failure.
If one of these messages is displayed:
• Reestablish communication if the device is removed or not fully
connected by reinstalling the device. When the device is
recognized by the printer, the message is cleared.
• In case of a hardware failure, turn the printer off and back on. If the
error recurs, turn the printer off, remove the device, and call for
service.
The upper front door is open or the print cartridge is not installed.
Close the door or install the print cartridge, then close the door.
The duplex rear door is open.
Close the duplex rear door. The printer clears the message and
continues.