Removing A Flash Memory Option - Lexmark Optra S1625 User Manual

Removing a Flash Memory Option

W
ARNING
1
2
3
4
5
6
7
Electronic components are easily damaged by
:
static electricity. Touch something metal
before you touch the flash memory option.
If necessary, follow the steps under "Accessing the
Printer System Board" on page 293.
Locate the flash memory option. See page 296.
Push out on the metal clips at each end of the connector.
Rotate the flash memory option out to a 45° angle, and
gently pull it out of the connector.
Place the flash memory option in its original packaging.
If you did not save the packaging, wrap it in paper and
store it in a box.
If you need to install a replacement flash memory option
or other option on the system board:
-
See "Flash Memory Option" on page 304.
-
See "Printer Memory Option" on page 299.
-
See "Option Cards" on page 308.
See "Closing the Printer System Board" on page 297 to
reattach the shield and side door.
Installing Options
Memory and Option Cards
307