Lexmark Optra S1625 User Manual page 205

Attendance
Message
56 Standard Parallel
Port Disabled
56 Parallel
Port x Disabled
58 Too Many
Trays Attached
58 Too Many
Bins Attached
58 Too Many
Disks Installed
59 Incompatible
<device>
61 Defective
Disk
62 Disk Full
Meaning and Required Action
Data is sent to the printer across the parallel port, but the parallel port
is disabled. When the error is displayed, the reporting of other errors
is suppressed until the menus are entered or the printer is reset.
• Make sure the Parallel Buffer menu item in the PARALLEL MENU
is not set to Disabled.
• Press Go to clear the message. The printer discards any data
received on the parallel port.
• To reset the printer, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Reset Printer is on the
second line. Press Select.
The printer detects too many optional drawers with matching trays
are installed under the printer. See "Paper Sources" on page 140 for
information on how many sources your printer model may have.
The printer detects too many output options are installed on the
printer. See "Paper Exits (Output Bins)" on page 153 for information
on how many output bins your printer model may have.
The printer detects too many hard disks are installed. Your printer
can have only one hard disk option installed.
Turn the printer off and remove the extra option.
The printer detects that an incompatible option is installed on an
Optra S 1855. See note on page 253.
<device>: One of the following paper handling options: envelope
feeder, output bin x, duplex option, tray x.
The printer detects a defective hard disk during power on, or during
hard disk format or write operations.
Press Go to clear the message. Hard disk operations are not allowed
with a defective hard disk.
If the disk is read/write protected, use MarkVision to restore write
access.
• Turn the printer off and remove the defective hard disk. Replace it
with a new hard disk.
There is not enough free space in the hard disk to hold the data that
was sent to the hard disk for storage.
• Press Go to clear the message and continue processing. Any data
currently being written to the hard disk is lost.
• To reset the printer, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Reset Printer is on the
second line. Press Select.
Caring for Your Printer
Understanding Printer Messages
189