Lexmark Optra S1625 User Manual page 196

Caring for Your Printer
Status Message
Printing
Directory List
Printing Font
List
Printing Menu
Settings
Program Flash
DO NOT POWER OFF
Programming Disk
DO NOT POWER OFF
Ready
Ready Hex
180
Understanding Printer Messages
Meaning and Actions Allowed While Message is Displayed
A directory of the flash and hard disk contents is processing or
printing.
The printer is processing or printing a font listing.
The printer is processing or printing a list of the printer user default
settings and installed options.
• Press Stop to take the printer offline. The Not Ready message is
displayed. No more data is processed, but the printer processes all
paper currently in the printer paper path. Press Go to return to the
previous message.
• To cancel the current job, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Cancel Job is on the
second line. Press Select.
• To reset the printer, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Reset Printer is on the
second line. Press Select.
The flash memory is being programmed, which means fonts or
macros are being written to flash memory.
Do not perform any button actions while this message displays.
The hard disk is being programmed, which means fonts or macros are
being written to the hard disk.
No button actions are possible while this message is displayed.
Note: If information is written to flash memory and to hard disk at
the same time, the Program Flash message is displayed.
The printer is ready to receive and process data.
• Press Menu> or <Menu to take the printer out of Ready and enter
all menus.
• Press Stop to take the printer offline. The Not Ready message is
displayed. No data is processed. Press Go to return the printer to
Ready.
Note: A customized message may be displayed instead of Ready if
you use the PJL RDYMSG command, a Printer Job Language Ready
message. For more information, refer to the Technical Reference.
The printer is ready and Hex Trace mode is active. Hex Trace isolates
the source of a print job problem. With Hex Trace selected, all data
sent to the printer is printed in hexadecimal and character represen-
tation. Control codes are not executed.
To reset the printer, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Reset Printer is on the
second line. Press Select.