Copying; Making Copies; Copying Photos; Copying On Letterhead - Lexmark XC8100 Series User Manual

Hide thumbs Also See for XC8100 Series:
Table of Contents

Advertisement

Copying

Copying

Making copies

1
Load an original document into the ADF tray or on the scanner glass.
Notes:
To avoid a cropped image, make sure that the size of the original document and output is the same.
To make a quick copy, from the control panel, press
2
From the home screen, touch Copy, and then specify the size of the original document.
Note: If the document is a mix of different sizes, then select Mixed Letter/Legal.
3
If necessary, specify a tray or feeder and a different output size.
4
Send the copy job.

Copying photos

1
Place a photo on the scanner glass.
2
From the home screen, touch Copy > Content > Photo.
3
From the Content Source menu, select the setting that best matches the original photo.
4
Send the copy job.

Copying on letterhead

1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy, and then specify the size of the original document.
3
Touch Copy to, and then select the tray that contains the specialty media.
If you are loading the specialty media into the multipurpose feeder, then navigate to:
Multipurpose Feeder > select the size of the specialty media > Letterhead
4
Send the copy job.
Copying on both sides of the paper (two‑sided)
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Paper Setup.
3
Adjust the settings.
4
Send the copy job.
.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx825Cx860 seriesCx820 series

Table of Contents