Copying; Making Copies; Copying Photos; Copying On Letterhead - Lexmark MX320 Series User Manual

Copying

Copying

Making copies

1
Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and the output have the same
paper size.
2
From the control panel, specify the number of copies.
3
If necessary, adjust the copy settings.
4
Copy the document.
Note: To make a quick copy, from the control panel, press

Copying photos

1
Place a photo on the scanner glass.
2
From the control panel, navigate to:
> Copy >
3
From the Content Source menu, select the setting that best matches the original photo.
4
Send the copy job.

Copying on letterhead

1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
> Copy >
3
Select Copy to, and then select the tray that contains the letterhead.
If you are loading the letterhead into the multipurpose feeder, then navigate to:
Multipurpose Feeder >
4
Copy the document.

Copying on both sides of the paper (two sided)

1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
> Copy >
> Content Type >
> specify the size of the original document >
> select the size of the letterhead >
> Sides (Duplex)
.
> Photo
> Letterhead >
23