Lexmark Optra C710 Setup Manual page 98

Note:
The default login name
contains the characters !LEX
plus the UAA of the MarkNet
print server (for example,
!LEX00200022012F).
Note:
For information about
choosing PSERVER or
RPRINTER mode, look on the
CD. Click View Documentation
and look for the MarkNet link.
94
Novell NetWare
1
Install the NetWare software component on the
workstation. Look on the Drivers, MarkVision and
Utilities CD for the software. (Hint: Do a custom
install to add network support, and select
NetWare.)
2
Launch MarkVision. In the MarkVision main
window, find the new network printer. Look for
the line item containing your print server's
physical address (the MSB form of the print server
UAA).
3
Double-click the network printer. Configure the
MarkNet print server by doing the following:
a
Set a unique NetWare login name. This is the
name the print server uses to log in to the
NetWare server.
b
Enable the MarkNet port.
c
Select PSERVER mode.
If you want to manage NDS queues, you must
specify the NDS tree and context where the
MarkNet print server is defined. You also need
to create or select queues to be serviced.
If you want to manage bindery queues, you must
first specify the file servers. Afterward, you must
create or select queues to be serviced.
4
If prompted to reset the print server, select Yes to
immediately begin servicing the queues.