Lexmark Optra C710 Setup Manual page 92

Configuring and
Note:
For instructions on other
ways to set the IP address, look
on the Drivers, MarkVision, and
Utilities CD . Click View
Documentation and look for the
MarkNet link.
88
Configuring and printing
About the Drivers, MarkVision and Utilities CD
printing
You may have received more than one version of the
Drivers, MarkVision and Utilities CD, with different
Lexmark products. Always use the latest version CD.
Troubleshooting
For troubleshooting information, look on the Drivers,
MarkVision and Utilities CD. Click View Documentation
and look for the MarkNet link.
Use the table below
to locate your next step
Your network environment is...
TCP/IP
Novell NetWare
AppleTalk
OS/2 Warp Server
TCP/IP
Set the IP address, netmask, and gateway
You must assign an IP address, netmask, and gateway to
the print server for other network devices to find the
printer on the network.
• If you have DHCP, the proper address values are
• If you don't have DHCP, there are other methods
automatically assigned. To verify the assignment
has happened, print a network setup page and
make sure the IP address, netmask and gateway
appear as non-zero.
you can use to manually assign the address such as:
Turn to page
88
93
95
95