Step 3: Set Up The Optional Drawer Unit - Lexmark Optra C710 Setup Manual

Step 3: Set up the optional
Note:
The optional drawer
must be installed prior to install-
ing the duplex unit.
Caution!
If you are installing
the optional drawer unit after ini-
tial printer setup, turn the printer
off, and disconnect the power
cord and printer cables.
Paper trays
drawer unit
Optional drawer unit
Your printer supports an optional drawer unit with two
250-sheet trays. If you are installing the optional drawer
unit, complete the following steps.
1
Remove any orange tape and packing material
from the drawer unit.
Check both trays for packing material.
Set up the optional drawer unit
31