Step 10: Load The Paper Tray - Lexmark Optra C710 Setup Manual

Step 10: Load the paper tray

Loading the
Note:
Do not place paper into
the duplex unit tray.
Note:
If you load transparen-
cies in tray 1, make sure you
change the Paper Type setting to
transparency. See "Changing
the Paper Type setting" on
page 81 for more information.
paper trays
Your printer has one standard 250-sheet tray—tray 1—
that holds A4, B5, letter, legal, and executive size paper.
You can also load transparencies in tray 1 or the multipur-
pose feeder. For details about the types of media your
printer supports, refer to your printer User's Guide.
If you attached an optional drawer unit, the instructions
are the same for loading paper in those trays. However,
load only paper in tray 2 and tray 3.
To load the tray:
1
Pull the paper tray completely out of the printer.
2
Set the paper tray on a flat surface.
Loading the paper trays
73