Lexmark Optra C710 Setup Manual page 97

Note:
You can print from DOS
using LexIP if you assign a
logical port name of LPT1,
LPT2, LPT3 or LPT4.
c:\>copy FileName LPT3
Novell NetWare
c
Click Other, Lexmark Network Printer Monitor,
then click OK. A list of available print servers
is shown. If your print server does not appear
in the list, click Add Adapter then follow the
instructions on the screen until it does appear.
d
Find the IP address of your print server in the
list, then select it.
e
Specify a logical port name to associate with
the printer, then click OK.
f
Verify that the logical port name you assigned
to the printer now shows in the box labeled
Print to the following port.
NDPS (Novell Distributed Print Services)
If you have MarkNet print servers in an NDPS
environment, we recommend that you install the Lexmark
NDPS IP Gateway. This allows your printers to be tightly
integrated with NDPS so that you can easily monitor,
control and print to them.
You can get the gateway plus all support files and
installation procedures from the Lexmark web site
(www.lexmark.com).
Non-NDPS (queue-based)
The easiest way to configure the print server for NetWare
jobs in a non-NDPS environment is to use MarkVision.
MarkVision can automatically create all the necessary
NetWare objects (print queue objects, print server objects,
and printer objects).
Do the following from a Windows NT workstation
running Novell NetWare Client32 software, or from a
Windows 95 or Windows 98 workstation running either
Novell Client32 or Microsoft Client for NetWare networks.
93
Novell NetWare