Lexmark Optra C710 Setup Manual page 55

Warning!
Do not tilt or rotate
the transfer belt on its end. Do
not touch the glossy transfer
film. Touching the film may
cause print quality problems.
7
Remove the transfer belt from its package.
8
Remove the orange tabs and any packing material
or tape from the transfer belt.
a
Lift and pull the orange tab trom the top of the
transfer belt.
b
Pull the two bottom orange tabs away from the
transfer belt.
9
Align the bottom of the transfer belt with the rails
inside the printer.
10
Push the transfer belt into the printer until it is
firmly seated.
Install the transfer belt
51