Lexmark Optra C710 Setup Manual page 101

Novell NetWare
NDPS (Novell Distributed Print Services)
1
Make sure the TCP/IP protocol is turned on
(activated) in the print server. To find out, print a
network setup page and look in the paragraph
under TCP/IP.
2
Make sure your NetWare file server has TCP/IP
support configured and loaded.
3
Make sure you are running NDPS version 2.0 or
later.
4
Make sure you've created and loaded an NDPS
Manager.
5
Read the online documentation about Lexmark's
NDPS support. Look for a README file or a
technical white paper in the package you
downloaded from Lexmark's web site.
6
If you are still having trouble, contact Lexmark for
help at 1-800-LEXMARK (1-800-539-6275) or on the
World Wide Web at http://www.lexmark.com.
Non-NDPS (queue-based)
1
Make sure the NetWare protocol is turned on
(activated) in the print server. To find out, print a
network setup page and look in the paragraph
under NetWare.
2
Find out if the print server is servicing your
NetWare queue.
3
If your queue doesn't appear in the list of queues
being serviced, reset the printer, wait a few
minutes, then look for the queue in the list again.
4
If your queue still does not appear in the list of
queues being serviced, you have a print server
setup problem. Reconfigure the MarkNet print
server.
97
Novell NetWare