Lexmark Optra C710 Setup Manual page 43

203 mm
(8 in.)
555 mm
203 mm
(22 in.)
(8 in.)
864 mm
(34 in.)
4
330 mm
(13 in.)
507 mm
(20 in.)
1597 mm
(63 in.)
Place the duplex unit base in a suitable location.
a
To mount the duplex unit base on the optional
drawer unit, align the pins and connector on
top of the optional drawer unit with the holes
and connector on bottom of the duplex unit
base.
b
If you do not have an optional drawer unit,
place the duplex unit base on a flat, stable sur-
face in a well–ventilated area.
Allow space in front of duplex unit (555 mm, 22
in.) for easy duplex tray removal.
Allow space behind the duplex unit (507 mm, 20
in.) for access to the rear duplex assembly.
The following guidelines will help to ensure proper
printer operation and prevent print quality prob-
lems. They will also extend the life of your printer
and supplies.
Do not place the duplex unit:
– In direct sunlight
Near heat sources or air conditioners
–
– In dusty or dirty environments
Installing the duplex unit base
39