Lexmark Optra C710 Setup Manual page 82

Note:
Do not load envelopes
in the paper trays. Envelopes
can only be fed through the mul-
tipurpose feeder.
78
Loading envelopes
Loading
envelopes
1
Place the envelopes on the multipurpose feeder
with the flap up and on the right side of the
printer. Make sure the short edge of the envelope
enters the printer as shown.
Do not load envelopes that have been prestamped
by the post office.
Do not load envelopes with stamps affixed.
Do not load envelopes that contain windows, holes,
perforations, cutouts, or embossing
Do not close the multipurpose feeder while enve-
lopes are in the feeder.
Refer to your User's Guide for more information on
using envelopes.
2
Set the paper source to
You can set the paper source through the
on the operator panel or your printer driver.
MENU
3
Set the envelope size to match your envelope.
You can use your operator panel or printer driver to
select the appropriate envelope size through the
settings listed under
Manual Env Size
and .
PAPER SIZE
.
MP Envelope
PAPER
PAPER MENU