Lexmark Optra C710 Setup Manual page 26

Note:
Depending on your
printer model, you may already
have a MarkNet N2001e print
server installed in one of the
option slots.
22
Installing adapters
Installing
You can install the following adapters in your printer:
adapters
A print server (sometimes called an Internal Network
Adapter or INA), such as the MarkNet
connect the printer to a Local Area Network (LAN). Mark-
Net N2000 print servers support the following:
The tri-port adapter provides connectors for the following:
The parallel port adapter provides an additional
parallel port. Its IEEE 1284C connector requires a
1284 A–C cable. You can purchase a 3 m (9.8 ft) cable, Lex-
mark part number 43H5171, meeting these specifications.
Refer to the documentation that came with your adapter
for more information.
There are three available option slots on your interconnect
board. All option slots support network, tri-port, parallel
port, USB, and Fax modem adapters.
Hard disk adapters must be installed in option 3.
• Print server
• Tri-port adapter
• Parallel port adapter
• Hard disk
• USB adapter
• Fax modem adapter
• Ethernet 10BaseT and 10Base2
• Ethernet 10/100BaseTX
• Token-Ring
• Serial interface (RS-232C or RS-422), which can also
serve as a receive-only fax port
• LocalTalk network
• An infrared adapter
TM
N2001e, lets you