Lexmark Optra C710 Setup Manual page 29

Interconnect board
Screws
4
Align the adapter connector with the connector on
the interconnect board.
5
Push the adapter firmly into the connector until it
is seated on the interconnect board.
The two connectors should fit snugly together.
6
Insert the two screws saved from the adapter cover
(or the extra screws shipped with the adapter)
through the holes in the connector bracket and
into the adapter.
7
Gently tighten the screws to secure the adapter.
8
Repeat steps 2 through 7 to install another adapter.
9
Continue with "Installing the EMI shield and rear
cover" on page 28.
Installing adapters
25