Lexmark Optra C710 Setup Manual page 94

Note:
It does not matter which
form of the UAA you use (MSB
or canonical).
Note:
Information on installing,
using and troubleshooting the
utility resides on the Drivers,
MarkVision and Utilities CD.
90
Configuring and printing
2
Set the IP address in your workstation ARP table.
At a command prompt, type a command line
similar to the following, inserting the IP address
you want to assign and the UAA:
arp -s 192.168.236.24 00-20-00-22-01-2F
3
Set the IP address, netmask and gateway in the
print server. To do this, telnet to port 9000 on the
print server by typing a command similar to the
following:
telnet 192.168.236.24 9000
4
Verify the print server is up and running on the
network.
ping 192.168.236.24
Print server TCP/IP setup utility
You can use this simple utility to initialize the IP address if
your workstation is running Windows 95, Windows 98 or
Windows NT and is on the same subnet as the printer. You
need to know the physical address of the print server to
use this method. You can locate the UAA on the print
server setup page.
To install this utility, launch the Drivers, MarkVision and
Utilities CD, do a custom install to add network support, and
select Print Server TCP/IP Setup Utility .
Once the IP address has been set (using any method), you
can use your browser to remotely view and manage the
network printer. Functions include viewing printer status
in real time, resetting the printer, changing settings, and so
forth. Type the print server IP address in the URL field of
the browser (for example, http: //192.168.236.24) and
press Enter.